Super Flex Universal Joint
	Quantity in Basket: None Code: SFUJ-1310 Price: $67.50 Shipping Weight: 2.00 pounds
Quantity:
Off-Set Universal Joint 1310 Series If you need to run a higher angle in your drive shaft than a conventional U-Joint would allow, The unique design of off-set trunnions sets the mating yokes further apart than a more conventional joint. This allows for 10 degrees more flexibility than would be otherwise obtainable. While 10 degrees may not sound like a lot, With a 30" drive shaft, this will allow more than 5" of additional droop at your axle prior to binding of the universal joint. Testing shows that installing this universal joint into standard yokes, the drive shaft will flex to 40 degrees. With a little grind work on the yokes the drive shaft will flex to 45 degrees. The "Super-Flex" universal joint was not designed to be a "cure all", But rather specifically to solve a binding problem that one may incur under situations such as full axle droop and spring wrap. Situations like a front drive shaft, where you have a lot of lift and have also installed buggy springs or revolver shackles or shackle reversal. This joint may cause some vibration problems. Recommended for front drive shaft low speed only.